Select Page

China factory Marine Chain with and Without Gear Black or Hot DIP Galvanized Anchor Chain

Product Description

Our own factory has more than 23 years of production experience
Each set of main connected components must pass standard tests.
Thousands of roads, safety first, quality clearance is our first criterion

Product Parameters

Factory Supplied High Strength stud link anchor chain:
Size: “1/2” –“2-3/4”

Material:20Mn2,CM490,30Mn2.

Surface treatment: Galvanized, Black painted, Self color

Application: Ship, iron and steel industry, petroleum chemical industry, coal mine

Technical Specification(Stud link anchor chain): 

Diameter Chain Link Size U1 Open Link Chain U2 Open Link Chain U3 Open Link Chain Approx.Weight
Outside Length Outside Width Proof Load Breaking Load Proof Load Breaking Load Proof Load Breaking Load 27.5M
INCH MM MM MM KN KN KN KN KN KN KG
 1/2 12.5 75 45 46 66 66 92 92 132 98
  9/16 14 84 50.4 58 82 82 116 116 165 119
 5/8 16 96 57.6 76 107 107 150 150 216 156
 11/16 17.5 105 63 89 127 127 179 179 256 186
 3/4 19 114 68.4 105 150 150 211 211 301 230
 13/16 20.5 123 73.8 123 175 175 244 244 349 260
 7/8 22 132 79.2 140 500 500 280 280 401     300
 15/16 24 144 86.4 167 237 237 332 332 476 370
1  1/16 26 156 93.6 194 278 278 389 389 556 431
1 1/8 28 168 100.8 225 321 321 449 449 642 496
1  3/16 30 180 108 257 368 368 514 514 735 564
1 1/4 32 192 115.2 291 417 417 583 583 833 635
1  5/16 34 204 122.4 328 468 468 655 655 937 712
1  7/16 36 216 129.6 366 523 523 732 732 1050 800
1 1/2 38 228 136.8 406 581 581 812 812 1160 887
1  9/16 40 240 144 448 640 640 896 896 1280 1032
1 5/8 42 252 151.2 492 703 703 981 981 1400 1084
1 3/4 44 264 158.4 538 769 769 1080 1080 1540 1197
1 13/16 46 276 165.6 585 837 837 1170 1170 1680 1310
1 7/8 48 288 172.8 635 908 908 1270 1270 1810 1438
2 50 300 180 686 981 981 1370 1370 1960 1546
2  1/16 52 312 187.2 739 1060 1060 1480 1480 2110 1661
2 1/8 54 324 194.4 794 1140 1140 1590 1590 2270 1791
2  3/16 56 336 201.6 851 1220 1220 1710 1710 2430 1926
2  5/16 58 348 208.8 909 1290 1290 1810 1810 2600 2086
2 3/8 60 360 216 969 1380 1380 1940 1940 2770 2249
2  7/16 62 372 223.2 1030 1470 1470 2060 2060 2940 2361
2 1/2 64 384 230.4 1100 1560 1560 2190 2190 3130 2516
2  9/16 66 396 237.6 1160 1660 1660 2310 2310 3300 2676
2 11/16 68 408 244.8 1230 1750 1750 2450 2450 3500 2885
2 3/4 70 420 252 1290 1840 1840 25800 25800 3690 3571

 

Detailed Photos

Provide ODM, OEM service
Has a professional technical RESEARCH and development team, set research and development, production, sales in one.

 

 

 

Company Profile

Founded in 1998, HangZhou CHINAMFG Co., Ltd, formerly known as Xihu (West Lake) Dis. Chain Factory, is located in Xihu (West Lake) Dis. Country of ZheJiang Province known as “The Gem City of China”, and specializes in producing and marketing chain and rigging related products at home and abroad. Our company has independent import and export operating rights, and can handle the certifications of CCS, LR, DNV and other famous classification societies for products. Our products are sold to dozens of countries such as Europe, America and Middle East as well as more than 10 provincial and municipal regions in China, ano are widely applied to the fields of ships, steel, petrochemical industry, coal mine, etc.In the principle of “Quality-honoring & Promise-keeping”, our company meets the requirements of all the customers through service innovation, changes the original production state through technical innovation, improves the product quality through process innovation, and continuously goes to standardization, elaboration, process and scientification through the business thought of constant innovation. Absolute CHINAMFG will move a heart of stone. Our company is willing to cooperate with domestic and foreign new/old customers in utmost sincerity, to create a common future! 
 

Certifications

 

Packaging & Shipping

Packaging & Delivery:

Packing details: 
Bulk packing
Packed in wooden cases
Packed in Iron drum, then in pallets
According to your requirements

Delivery Detail: Usually 30 days after receiving your irrevocable L/C or advance payment. 

Payment: Western Union, Paypal, Money Gram, T/T, L/C

Packaging

We can pack the products in neutral packing or customized packing(customers need to pay a little extra cost)

Shipping: DHL,TNT,or by sea-shipment

Delivery time: within 30 days after the order confirmed

FAQ
Q1: Are you a factory or trading company
A1: We are a factory, we can guarantee our price is first-hand,very cheap and competitive.
Q2: What advantages do you have?
A2:We have been engaged in this industry for 23 years, we are the drafting unit of the snow chair industry standard,we have TUV/GSONORM,BSCI certificates, our workshop has introduced 6S management method and lean production.

Q3: How does your factory do regarding quality control?
A3: Our skilled QC department will test products during each production process.What’s more. before packing and shipping we will test again for each finished products.So we have 100% quality guarantee to our clients.Anyway,we will be responsible for any quality problem.
04: Can you provide complete product information and pictures to
e-commerce customers? A4:Yes.we also have videos.

05: Are there any discounts for new customers? A5: Yes, please contact us for details.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Usage: Drag Chain, Stud Anchor Chain
Material: Alloy
Surface Treatment: Baking Paint
Samples:
US$ 1/pieces
1 pieces(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

gear chain

How does a gear chain handle different speeds and loads?

A gear chain is designed to handle different speeds and loads by incorporating specific features and materials:

1. Gear Ratio Selection:

– The gear ratio is the ratio of the number of teeth on the driving gear to the number of teeth on the driven gear. By selecting the appropriate gear ratio, the speed and torque can be adjusted to match the requirements of the application. Higher gear ratios provide lower speed and higher torque, while lower gear ratios offer higher speed and lower torque.

2. Gear Tooth Design:

– The tooth design of a gear chain is optimized to distribute the load evenly across the teeth. This ensures that each tooth can handle its share of the load without excessive stress concentration. The tooth profile and pitch are carefully calculated to provide efficient power transmission and minimize wear.

3. Material Selection:

– Gear chains are typically made from high-strength materials, such as alloy steel or hardened steel, to withstand the loads and stresses imposed on them. The material selection is based on the anticipated loads and the desired durability of the chain. Heat treatment processes, such as quenching and tempering, are often employed to further enhance the strength and toughness of the chain.

4. Lubrication:

– Proper lubrication is crucial for the smooth operation and longevity of a gear chain. Lubricants reduce friction and wear between the gear teeth, allowing the chain to handle higher speeds and loads with reduced heat generation. Lubrication also helps to prevent corrosion and extend the chain’s service life.

5. Chain Tension:

– Maintaining proper chain tension is essential for optimal performance. Adequate tension ensures proper engagement of the gear teeth and prevents excessive slack or binding. Chain tensioners or tensioning devices may be used to adjust the tension and compensate for any elongation or wear that occurs over time.

6. System Design:

– The overall design of the gear chain system, including the selection of supporting components such as gears, bearings, and shafts, plays a vital role in handling different speeds and loads. The system must be engineered to provide adequate strength, alignment, and support to ensure reliable operation under varying conditions.

By carefully considering gear ratio selection, tooth design, material selection, lubrication, chain tension, and system design, a gear chain can effectively handle different speeds and loads. It provides efficient power transmission and reliable performance in a wide range of applications.

gear chain

How do you properly maintain and inspect a gear chain?

Maintaining and inspecting a gear chain is crucial to ensure its optimal performance, longevity, and reliability. Here are the key steps to properly maintain and inspect a gear chain:

1. Regular lubrication: Apply the recommended lubricant to the gear chain at specified intervals or as per the manufacturer’s guidelines. Ensure the lubricant is evenly distributed along the chain, and excess lubricant or contaminants are removed.

2. Cleanliness: Keep the gear chain clean by regularly removing dirt, debris, and accumulated contaminants. Clean the chain using suitable cleaning agents or solvents, and ensure it is properly dried before applying lubrication.

3. Tension adjustment: Check the tension of the gear chain regularly and adjust it as needed. Proper tension ensures the chain stays engaged with the gears and prevents excessive slack or tightness, which can lead to premature wear or damage.

4. Visual inspection: Perform regular visual inspections of the gear chain to identify any signs of wear, damage, or misalignment. Look for worn or broken teeth, excessive wear on the chain links or sprockets, loose connections, or signs of corrosion.

5. Measurement and alignment: Use appropriate tools to measure the chain’s pitch, roller diameter, and tooth profile. Check for proper alignment of the sprockets to ensure smooth engagement and prevent excessive wear. Make any necessary adjustments or replacements if deviations are detected.

6. Replacement of worn components: If any components of the gear chain, such as gears, sprockets, or rollers, are significantly worn or damaged, they should be promptly replaced to maintain the integrity and performance of the chain.

7. Regular maintenance schedule: Establish a regular maintenance schedule for the gear chain based on the operating conditions, manufacturer’s recommendations, and the level of usage. Adhere to the schedule to ensure timely inspections, lubrication, and necessary adjustments.

Remember to follow proper safety procedures when performing maintenance tasks, such as wearing appropriate protective gear and ensuring the equipment is properly isolated and locked out before inspection or maintenance.

gear chain

What is a gear chain and how does it work?

A gear chain, also known as a roller chain with sprockets, is a type of power transmission chain that is commonly used to transfer rotational motion between two parallel shafts. It consists of a series of interconnected links, known as roller links, which engage with teeth on sprockets to transmit power.

The basic components of a gear chain include:

– Roller Links: These are the individual links that form the chain. They have cylindrical rollers that are connected by side plates.

– Pins: The pins hold the roller links together and allow them to rotate freely.

– Bushings: The bushings are inserted into the roller links and provide a smooth surface for the pins to rotate on.

– Sprockets: The sprockets are toothed wheels that engage with the roller links. They are mounted on the shafts and transmit power by engaging with the rollers.

The operation of a gear chain is based on the principle of meshing between the teeth of the sprockets and the rollers of the chain. When one sprocket is rotated, the engaged rollers are driven, causing the entire chain to move and transmit power to the other sprocket.

The meshing between the sprocket teeth and chain rollers ensures a positive and efficient power transfer. The roller links rotate on the pins and bushings, allowing the chain to smoothly engage and disengage with the sprockets during operation.

Gear chains are widely used in various applications, such as industrial machinery, automotive systems, bicycles, and conveyors, where reliable and efficient power transmission is required.

China factory Marine Chain with and Without Gear Black or Hot DIP Galvanized Anchor Chain  China factory Marine Chain with and Without Gear Black or Hot DIP Galvanized Anchor Chain
editor by CX 2024-04-08

gear chain

As one of leading gear chain manufacturers, suppliers and exporters of products, We offer gear chain and many other products.

Please contact us for details.

Mail:gear-chain.top

Manufacturer supplier exporter of gear chain

Recent Posts